Push the "Super NS" button on top of the camera to activate the Super Nightshot function, which enhances regular Nightshot, making the subject brighter by 16 times. Turn on the "Nightshot Light" at the front of the camera to add infrared rays to illuminate the subject. Push the "Menu" button on the left side of the camera to access the main menu, select "Camera Set," scroll down to select "N.
Light" and select "On. Push the "Exposure" button on the left side of the camera to manually adjust the exposure when the subject is backlit and dark or very bright against a dark background. Twist the dial on the heel of the camera. A guide appears on the screen. Twist the dial toward the "-" to make the subject darker. Signal flow Dubbing with the built-in microphone No connection is necessary. Audio dubbing Adding an audio sound on a recorded tape 1 Insert the recorded tape into your camcorder. Then press X at the point where you want to start recording to set your camcorder to the playback pause mode.
Superimposing a title If you use a tape with cassette memory, you can superimpose the title while recording or after recording.
Key Features of Sony DCR-SX21E (DCR-SX21) Camcorder:
When you play back the tape, the title is displayed for five seconds from the point where you superimposed it. You can select one of eight preset titles and two custom titles p. Superimposing a title If you set the write-protect tab to lock You cannot superimpose or erase the title. Slide the write-protect tab to release the write protection.
To use the custom title If you want to use the custom title, select If the tape has a blank portion You cannot superimpose a title on the portion. Title erase display appears. Making your own titles You can make up to two titles and store them in cassette memory. Each title can have up to 20 characters. Labeling a cassette If you use a tape with cassette memory, you can label a cassette. The label can consist of up to 10 characters and is stored in cassette memory. Labeling a cassette To enter a space Select [ ], then select the blank part.
To change the label you have made Insert the cassette to change the label, and operate in the same way to make a new label. If you set the write-protect tab of the tape to lock You cannot label the tape. The default settings can be partially changed. First, select the icon, then the menu item and then the mode. Menu items are displayed as the following icons: When you play back the tape on other camcorders or VCRs, noise may occur in pictures or sound.
To switch the video input on a Sony TV when using the laser link function p. Resetting the date and time The default clock setting is set to Tokyo time for the models sold in Japan, and New York time for other models. If you do not use your camcorder for about six months, the date and time settings may be released bars may appear because the vanadium-lithium battery installed in your camcorder will have been discharged p. You can easily play back, record or delete still images.
You can exchange image data with other equipment such as a personal computer etc. Make sure that the LOCK switch is set to the right unlock position. The memory capacity allotted to each image varies depending on the selected image quality mode. CHROM Memory chromakey You can swap a blue area of a still picture such as an illustration or a frame with a moving picture.
Viewing a still picture — Memory photo playback Screen indicators during still image playback DSC Data file name Playing back six recorded images at a time index screen You can play back six recorded images at a time. This function is especially useful when searching for a particular image. Files modified with personal computers These files may not be displayed on the index screen. Image data modified with personal computers or shot with other equipment You may not be able to copy them with your camcorder.
If you press DISPLAY in the standby or recording mode You can see memory playback and the file name indicators in addition to the indicators pertinent to mini DV tapes, such as the time code indicator. This function is useful especially when checking recorded images or during a presentation. Preventing accidental erasure — Image protection To prevent accidental erasure of important images, you can protect selected images.
This function is useful for printing out still images later. Your camcorder does not record copyright control signals on the tape when it records. Sony mark to enjoy your camcorder fully. Your camcorder can 8 mm, Usable cassettes Audio mode bit mode: The original sound can be recorded in stereo 1, and the new sound in stereo 2 in 32 kHz.
Both sounds can be played back. If you run into any problem using your camcorder, use the following table to troubleshoot the problem. If the problem persists, disconnect the power source and contact your Sony dealer. Troubleshooting Symptom Displaying the recorded date, date search function does not work.
The new sound added to the recorded tape is not heard. The title is not displayed. The sound is muted or images do not appear when monitoring images through TV. Troubleshooting Symptom The cassette cannot be removed from the holder. Remaining tape indicator is not displayed.
Set the selector to DV input position. The correct remaining time is displayed.
Sony Video 8 Handycam CCD-TR7 Operating Instructions Manual
Disconnect the power cord of the AC power adaptor or remove the battery pack. After reconnecting the power source, operate your camcorder. Warning indicators The video heads are dirty Slow flashing: The battery is dead or nearly dead Slow flashing: LINK cable is connected p. When charging the battery pack, use a commercially available AC plug adaptor [a], if necessary, depending on the design of the wall outlet [b]. Maintenance information and precautions Moisture condensation If your camcorder is brought directly from a cold place to a warm place, moisture may condense inside your camcorder, on the surface of the tape, or on the lens.
In this condition, the tape may stick to the head drum and be damaged or your camcorder may not operate correctly. LCD screen or in the viewfinder. If the above problem, [a] or [b] occurs, clean the video heads for 10 seconds with the Sony DVM12CL cleaning cassette not supplied. Check the picture and if the above problem persists, repeat cleaning. Be particularly careful of the lens. If any problem occurs, unplug your camcorder and contact your nearest Sony dealer.
- blaue haken in whatsapp gruppe.
- Download Sony DCR-SX21 PDF Manual User Guide.
- kumpulan software handy talky.
- Über dieses Produkt.
- Einleitung!
- It's time to speak out for your right to repair!
- iphone 6s Plus orten einstellen.
Otherwise, you cannot attach the tripod securely and the screw may damage your camcorder. Identifying the parts and controls Remote Commander The buttons that have the same name on the Remote Commander as on your camcorder function identically to the buttons on your camcorder. Commander modes 1, 2 and 3 are used to distinguish your camcorder from other Sony VCRs to avoid remote control misoperation.
Identifying the parts and controls Operation indicators 1 Cassette memory indicator p.
Page of Go. Page 49 - Searching the boundaries of recorded tap Page 50 - Searching a recording by date - Date sea Page 51 - Searching for the date without using cas Page 63 - Inserting a scene from a vcr — insert Page 92 - Recording images continuously Page 93 Page 94 - Self-timer memory photo recording Page 95 - Superimposing a still picture in a "Memo Page 99 - Recording an image from a mini dv tape a Page Page - Copying still images from a mini DV tape Page Page - Viewing a still picture - Memory photo p Page - Viewing a still picture — memory photo The CHG charge lamp turns off when the battery pack is fully.
Sony Handycam Vision Instructions
Getting Started Step 3: Turning the power on, and setting the date and time Touch the button on the LCD screen. Preparing for recording 2 degrees max. POWER switch 1 90 degrees to the camcorder 2 90 degrees max. Open the LCD panel 90 degrees to the camcorder 1 , then rotate it to the best angle to record or play 2.
How to Transfer Sony Handycam Video to Computer | TurboFuture
To record still images 3 St. Otherwise, image data may be damaged. It may take s. To use zoom, move the power zoom lever. Move the power zoom lever slightly for a 6 Built-in microphone slower zoom. Move it further for a faster Records sound.
Sound picked up by the built-in microphone is. To record in mirror mode, open the LCD screen 90 degrees to the cam.